| Sect | | () |
| 2025-04-01 | Tuesday |
| 16:00 | 18:00 | Registration |
| 18:30 | 21:00 | Scientific committee meeting |
| 2025-04-02 | Wednesday |
| 08:00 | 08:30 | Registration |
| 08:30 | 09:00 | Seminar opening |
| Sect | First Session | () |
| | A synthetic route to 3,5-dinitropyridine analogs and evaluation of their thermal properties
L. Hooker, M. Hamilton, J. Davis, C. Snyder |
| | Recent developments of energetic di- and trisubstituted cubanes
A. Bartonek, T. Klapötke, B. Krumm |
| | Energetic polymers derived from oxetanes
N. Boulton, C. Morrison, C. Murray, C. Pulham |
| | Triazol polymer, first step for a self-healing PBX
F. Lacemon, G. Eck, T. Alaime, R. Baati, R. Avila Rovelo, M. Nimmakayala |
| | Coffee break |
| | Reinvestigation of alkali and alkaline earth metal styphnate salts as components for priming com...
S. Yiu, M. Lommel, J. Stierstorfer, T. Klapötke |
| | Towards purifying polyvinyl nitrate
S. Spice, M. Chandwani, E. Morris, P. McMaster, C. Morrison, C. Pulham |
| | Synthesis and evaluation of novel TATB-inspired energetic materials
M. Benda, C. Snyder, D. Chavez |
| | Novel explosive method for the synthesis of silver nanoparticles
J. Uszko, R. Matyáš, S. Eichhorn, A. Patil, S. Hall |
| | Lunch |
| Sect | Second Session | () |
| | PETN under pressure
H. Quayle, Q. Chan, X. Liu, C. Pulham, C. Morrison |
| | Optimization of fiber optic probe for measuring detonation velocity
S. Jirman, D. Sedlacek, J. Pachman |
| | Isocyanate-free energetic polymer binders
T. Bugnand, M. Bouquey, F. Lacemon, I. Dulac |
| | Mitigating environmental impact of TNT production: Strategies for red water reduction and treatment
L. Bauer, T. Klapötke, J. Stierstorfer |
| | Coffee break |
| | Research on material model and parameters of metal thin plate under close-in explosion load
X. Li, S. Yang, Q. Dong, L. Zhang, R. Hu, J. Feng, Z. Lu |
| | Energy output of HMX-based aluminized explosives with varying aluminum (Al) and polytetrafluoroe...
W. Cao, W. Dai, Y. Mao, J. Wang, Q. Liu, W. Guo, Y. Han |
| 2025-04-03 | Thursday |
| Sect | Third Session | () |
| | Aluminized highly energetic materials simulation under partial chemical equilibrium assumption w...
Y. Caridi, J. Selesovsky, A. Cucuzzella, J. Pachman, S. Berrone |
| | Exploring complex potential energy landscapes of computationally modelled ballistic modifiers
H. Newman, C. Pulham, C. Morrison |
| | Thermal isolation modeling of aluminized energetic materials for low-cost computational code
A. Cucuzzella, Y. Caridi, S. Berrone |
| | An improved statistical analysis of 72 sensitivity datasets
D. Christensen, A. Heijden, G. Novik |
| | Coffee break |
| | Construction of a composite surface coating layer with high efficiency on desensitization of HMX
S. Duan, Q. Zhu, S. Li |
| | Long term decomposition and crystallisation kinetics of ADN under some crystallographic aspects
P. Schultz, C. Seidel, M. Herrmann, T. Heintz |
| | Comparing thermal and chemical analysis of aged and unaged NC-based propellants
R. Vries, E. Haye |
| | Group Photography |
| | Lunch |
| Sect | Fourth Session - POSTERS | () |
| | Scientific Committee meeting - young presentations evaluation |
| | Social meeting |
| 2025-04-04 | Friday |
| Sect | Fifth Session | () |
| | Modelling complex ageing behavior of tensile modulus in CTPB-bonded propellant – parametric and ...
M. Bohn, G. Tussiwand |
| | Synthesis and characterisation of the energetic plasticiser Bu-AENA
S. Ek, M. Sjöblom, M. Brantlind, J. Johansson |
| | New green solvents for high dissolution and the mechanism of strongly hydrogen-bonded explosives
J. Chen, S. Zhuang, Y. Jia, Y. Liu |
| | LLM-105: achieving different morphologies for different properties
A. Beaucamp, T. Bouchet, A. Damervalle, D. Frank, A. Forzy, E. Pasquinet, D. Picart, N. Pin, C. ... |
| | Coffee break |
| | BKNO3 pyrotechnic igniters for SRM: analysis of performance dispersion from developme...
B. Betti, G. Pella, M. Fiorillo |
| | An overview of vibration effects on energetic materials
M. Ferrapontoff Lemos, P. Simões Teixeira Amaral, M. Heil, M. Bohn |
| Sect | Prize awarding | () |
| Sect | Seminar closing | () |
| P1 | | Studies on inert surrogate for pressable plastic bonded explosives
Ö. Güneş Ekim |
| P2 | | Catalyst screening for reaction of HTPB and IPDI in PBX formulations
M. Erdurucan |
| P3 | | Synthesis and characterisation of the novel energetic triazenide: PPN bis(1-methyl-3-nitro-1,2,4...
B. Westwater, P. Portius |
| P4 | | Molecular simulation of reaction mechanisms and transition states
A. Omlor, M. Bohn |
| P5 | | Calorimetric bomb test as a method for the selection of optimal boron powder for pyrotechnic app...
M. Krstović, J. Petković-Cvetković, I. Dimitrijević, A. Ćitić, D. Bajić |
| P6 | | Study on the influence of material properties and explosive quantities on the formation of Explo...
I. Păcurar, L. Matache, D. Pîrvoi, C. Puică |
| P7 | | Measuring powder flow parameters of inert simulants for 3D printing explosives
R. Aldhaheri, R. Millar, R. Vrcelj |
| P8 | | The synthesis and characterization of energetic materials containing both a tetrazole and a stra...
J. Zuckerman, D. Piercey |
| P9 | | Microwave synthesis of triethylene glycol diazide (TEGDA): Advanced approaches and characterization
J. Lechner, T. Keicher |
| P10 | | Numerical and experimental analysis of Semtex 1A blast wave parameters
R. Fosse, D. Sedlacek, J. Pachman |
| P11 | | The effect of graphene oxide (GO) on the bulk crystallization of ammonium nitrate
F. Alhosani, R. Vrcelj |
| P12 | | Effects of the explosion-generated plasma on the ammunition shell
Z. Bajić, P. Radovanović, B. Jovanović, J. Bogdanov |
| P13 | | The danger related to the use of ammunition and explosives
J. Rećko |
| P14 | | Comparative analysis of the ESD sensitivity of B/KNO3 and B4C/KNO3
P. Hřebíčková, D. Cantini, V. Pelikán, J. Pachman |
| P15 | | Synthesis and characterization of novel transition metal coordination compounds of 5-(3,5-dinitr...
W. Greenwood, P. Portius |
| P16 | | Hazard evaluation of nitrocellulose synthesized from okara (soy bean-curd refuse) as a raw material
K. Aritomi, E. Higashi, K. Okada, K. Katoh |
| P17 | | The desulfurization of high nitrogen heterocycles
J. Zuckerman, D. Piercey |
| P18 | | Surface structures of HMX crystals investigated by means of confocal and atomic force microscopy
M. Herrmann, H. Weyrauch |
| P19 | | Synthesis and characterization of 1-hydroxy-5-methyltetrazole and its energetic salts
L. Eberhardt, M. Benz, J. Stierstorfer, T. Klapötke |
| P20 | | Characterizing the decomposition and hydrate stability of sodium 5,5'-azotetrazolate
J. Mikuláštík, A. Votýpka, M. Labaj, J. Nesveda, Z. Jalový, Z. Zmrhalová, L. Červenka, R. Matyáš |
| P21 | | OPTIMEX: Optimization of a simple plane wave generator
M. Künzel, J. Kucera |
| P22 | | Effect of copper tube quality on the cylinder expansion test results
M. Künzel, J. Kucera, J. Pachman |
| P23 | | Synthesis and evaluation of HEDOs in propellant formulations
A. Dejeaifve, R. Van Riet, R. Dobson |
| P24 | | Research on TNT equivalence of different PBX with aluminium and magnesium
J. Bogdanov, D. Bajić, R. Sirovatka, M. Krstović, M. Timotijević, Z. Bajić |
| P25 | | Thermal characterization of CHNO-oxidizer TNEF
M. Bohn, J. Lechner, M. Heil, T. Klapötke |
| P26 | | Strategies for treating explosives-contaminated wastewater: addressing the environmental and hea...
J. Heidrich, L. Bauer, T. Klapötke, J. Stierstorfer |
| P27 | | LOVA propellants based on RDX and GAP energetic plasticizers - Part 2
D. Holeoleo, T. Rotariu, F. Dîrloman, A. Rotariu, A. Diacon, B. Pulpea |
| P28 | | Selective synthesis of energetic acrylates using microreaction technology
H. Wegner, A. Mendl, D. Bošković, U. Schaller |
| P29 | | Measurement of a single fragment’s velocity by using a controlled fragmentation method
M. Tagawa, N. Takahashi, R. Hiyoshi |
| P30 | | Thermal decomposition behavior of nitrocellulose in the presence of nitric acid solution
D. Kinjo, Y. Furuno, E. Higashi, T. Tamba, K. Okada, K. Katoh |
| P31 | | Effect of 3D printed shaped charge liner on the effectiveness of shaped charges
M. Bilina, M. Vítek, T. Dražan, P. Skalický |
| P32 | | Numerical study regarding the functioning of solid rocket motor using 3d printed grain
A. Braic, L. Matache, A. Rotariu, D. Pîrvoi |
| P33 | | Study on performance and safety characteristics of multilayer composite propellants
I. Dan, F. Dîrloman, A. Rotariu, L. Matache, T. Rotariu |
| P34 | | Comparative analysis and charge modeling using additive manufacturing in explosive breaching
M. Sedláček, M. Bilina, J. Procházka |
| P35 | | New smoke formulations based on copper (II) phthalocyanine
A. Schweiger, T. Klapötke |
| P36 | | Enhancing the rheological and processing properties of PBX explosives containing boron through s...
D. Bajić, I. Dimitrijević, M. Krstović, B. Fidanovski, Z. Bajić |
| P37 | | Rocket motor insulation – different fillers and their effect on rheological behavior and interna...
D. Fromm, S. Rest, K. Zeyer, T. Klapötke |
| P38 | | Lead oxide(II, IV) replacement in gasless pyrotechnic time delay compositions
M. Gerlich, W. Trzciński, M. Hara |
| P39 | | Investigation of reaction propagation in commercially available shock tubes
M. Kreisl, P. Kuna, V. Pelikán, B. Janovský |
| P40 | | IEM research labs at the start to safety 2.0
M. Vitík, M. Ferjenčík |
| P41 | | Replacement of RDX by TKX-50 in a plastic bonded explosive based on Viton A
A. Ali Helmy, T. Klapötke, A. Elbeih |
| | Some issues of hydroxyl derivatives of ferrocene as modifiers of the combustion rate of composit...
T. Sałaciński, W. Pucko |
Home